# 3D View showing different mesh

**URL:** <https://resource.dopus.com/t/3d-view-showing-different-mesh/30482>\
**Category:** Help & Support\
**Created:** [November 11, 2018, 9:31pm UTC](https://resource.dopus.com/t/3d-view-showing-different-mesh/30482 "2018-11-11T21:31:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sadicus](https://resource.dopus.com/letter_avatar_proxy/v4/letter/s/43a26b/32.png) [@sadicus](https://resource.dopus.com/u/sadicus)\
**Post date:** [November 11, 2018, 9:31pm UTC](https://resource.dopus.com/t/3d-view-showing-different-mesh/30482/1 "2018-11-11T21:31:56Z")

</div>

DOPUS Viewer is showing a "T Pose" rather than the actual exported mesh.

1. Exported from Poser 11.1
2. viewed in Autodesk FBX View
3. viewed in DOPUS Viewer Pane  
 ![DOPUS_3Dview1](https://resource.dopus.com/uploads/default/original/3X/6/e/6e1615db8f9888919cf7cd9995c6896757a2f746.jpeg)

---

<div class="post-metadata">

**Author:** ![Leo](https://resource.dopus.com/user_avatar/resource.dopus.com/leo/32/69732_2.png) [@Leo](https://resource.dopus.com/u/Leo)\
**Post date:** [November 11, 2018, 9:47pm UTC](https://resource.dopus.com/t/3d-view-showing-different-mesh/30482/2 "2018-11-11T21:47:41Z")

</div>

I don't know why it is doing that. It's not our viewer.

We didn't write the viewer; we only provide what it needs to run inside of Opus, the same as it runs inside of File Explorer.

From [3D Object preview (3mf, fbx, glb, gltf, obj, ply, stl)](https://resource.dopus.com/t/3d-object-preview-3mf-fbx-glb-glbt-obj-ply-stl/29541) :

> [@3D Object preview (3mf, fbx, glb, gltf, obj, ply, stl)](https://resource.dopus.com/t/3d-object-preview-3mf-fbx-glb-gltf-obj-ply-stl/29541/1):
>
> Note that the viewer's capabilities are down to what the Mixed Reality Viewer component in Windows provides in the form of its viewer. What we're adding to Opus is the ability to work with this new type of viewer.

That's assuming it's the Windows 3D Object viewer that you're using. If it's an entirely different viewer than I know even less about it. Either way, we're the wrong people to ask; you need to ask the people who wrote the viewer/component in question.
