# Command to clear Undo list?

**URL:** <https://resource.dopus.com/t/command-to-clear-undo-list/50955>\
**Category:** Help & Support\
**Created:** [May 26, 2024, 8:46pm UTC](https://resource.dopus.com/t/command-to-clear-undo-list/50955 "2024-05-26T20:46:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![aIex](https://resource.dopus.com/letter_avatar_proxy/v4/letter/a/c67d28/32.png) [@aIex](https://resource.dopus.com/u/aIex)\
**Post date:** [May 26, 2024, 8:46pm UTC](https://resource.dopus.com/t/command-to-clear-undo-list/50955/1 "2024-05-26T20:46:28Z")

</div>

I would like to insert additional "Clear Undo list" command into my Context Menus, like that:  
 ![image](https://resource.dopus.com/uploads/default/original/3X/a/3/a356309ea4c991535c0377d4d1ab29d39c79d0f1.png)

This would be a short path to the Clear command in Undo log window (which I open 99.9% of the time just to Clear everything and immediately close):  
 ![image](https://resource.dopus.com/uploads/default/original/3X/3/8/389d8e93c0a8ed8511906344032cfd101a1e2fe0.png)

Sadly this Undo log seems to be uncustomizable, so I can't just drag/copy the button nor see it's code.

---

<div class="post-metadata">

**Author:** ![Leo](https://resource.dopus.com/user_avatar/resource.dopus.com/leo/32/69732_2.png) [@Leo](https://resource.dopus.com/u/Leo)\
**Post date:** [May 26, 2024, 8:57pm UTC](https://resource.dopus.com/t/command-to-clear-undo-list/50955/2 "2024-05-26T20:57:28Z")

</div>

There isn't a command to clear it, but it also only lasts until Opus is exited, so it's not usually something you'd need to clear.

(OTOH, the File Log will persist across restarts, unlike the Undo Log.)

---

<div class="post-metadata">

**Author:** ![aIex](https://resource.dopus.com/letter_avatar_proxy/v4/letter/a/c67d28/32.png) [@aIex](https://resource.dopus.com/u/aIex)\
**Post date:** [May 26, 2024, 9:10pm UTC](https://resource.dopus.com/t/command-to-clear-undo-list/50955/3 "2024-05-26T21:10:32Z")

</div>

I usually clear my Undo list when I achive some stage of my tasks, when I'm done with a single set of files and moving to another set. Something can drastically change between these tasks (drive ejection, network disconnect etc.), so for me there is no point for old Undo records to stay and I prefer to clean them and start from scratch. Can a command for this be considered in the future?

P.S. Btw, restart of the entire Opus process in my case is an extemely rare event anyways 🙂
