# Saving layout ignores listers on other windows 10 virtual desktops

**URL:** <https://resource.dopus.com/t/saving-layout-ignores-listers-on-other-windows-10-virtual-desktops/35053>\
**Category:** Help & Support\
**Created:** [April 1, 2020, 8:46pm UTC](https://resource.dopus.com/t/saving-layout-ignores-listers-on-other-windows-10-virtual-desktops/35053 "2020-04-01T20:46:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![apocalypse](https://resource.dopus.com/user_avatar/resource.dopus.com/apocalypse/32/29397_2.png) [@apocalypse](https://resource.dopus.com/u/apocalypse)\
**Post date:** [April 1, 2020, 8:46pm UTC](https://resource.dopus.com/t/saving-layout-ignores-listers-on-other-windows-10-virtual-desktops/35053/1 "2020-04-01T20:46:14Z")

</div>

Title says it all.

I save my layout manually every time before I exit dopus.  
A few days ago I started using virtual desktops in Windows 10. (with Win+Tab, Win+Shift+Left, Win+Shift+Right to cycle). I had split a few listers on Desktop 1 and a few others on Desktop 2.  
After saving my layout to install the 12.20 update and after dopus restarted I was greeted with only the listers which were open on my active virtual desktop at the time when I saved the layout.  
I tested a few more times and I can say it can be reproduced in 100% of the cases.

My layout save button is like this:

```auto
Prefs LAYOUTSAVE=updatecurrent LAYOUTNAME=Layout
```

I have a 3 monitor setup and all listers are saved and properly restored on all monitors within the active virtual desktop. As long as all open listers are saved even across Desktops I wouldn't mind if dopus opens them all on the same desktop (active one where it was launched) even though they were split among other desktops as well.

Granted, virtual desktops are a feature that most users aren't even aware of being integrated into the OS, and that was 2 years ago. Much less are the ones that find actual use for it, still, this leads to loss of state and I hope it will be fixed at some point.

Thank you.

---

<div class="post-metadata">

**Author:** ![Leo](https://resource.dopus.com/user_avatar/resource.dopus.com/leo/32/69732_2.png) [@Leo](https://resource.dopus.com/u/Leo)\
**Post date:** [April 1, 2020, 8:53pm UTC](https://resource.dopus.com/t/saving-layout-ignores-listers-on-other-windows-10-virtual-desktops/35053/2 "2020-04-01T20:53:41Z")

</div>

Not a bug, but by design. Can be turned off (all the windows will open on the same desktop when re-opened) by changing **Preferences / Miscellaneous / Advanced: [Behavior] virtual\_desktop\_isolation**

It's described in detail here:  
[https://www.gpsoft.com.au/help/opus12/index.html#!Documents/Prefs/Advanced.htm](https://www.gpsoft.com.au/help/opus12/index.html#!Documents/Prefs/Advanced.htm)

---

<div class="post-metadata">

**Author:** ![apocalypse](https://resource.dopus.com/user_avatar/resource.dopus.com/apocalypse/32/29397_2.png) [@apocalypse](https://resource.dopus.com/u/apocalypse)\
**Post date:** [April 1, 2020, 9:32pm UTC](https://resource.dopus.com/t/saving-layout-ignores-listers-on-other-windows-10-virtual-desktops/35053/3 "2020-04-01T21:32:42Z")

</div>

Oh, guess I didn't look properly in the manual and jumped the gun there.

Thanks for clarifying Leo

---

<div class="post-metadata">

**Author:** ![Leo](https://resource.dopus.com/user_avatar/resource.dopus.com/leo/32/69732_2.png) [@Leo](https://resource.dopus.com/u/Leo)\
**Post date:** [April 1, 2020, 9:34pm UTC](https://resource.dopus.com/t/saving-layout-ignores-listers-on-other-windows-10-virtual-desktops/35053/4 "2020-04-01T21:34:50Z")

</div>

No worries, it's a pretty obscure setting!
